Power supply / Power regulator board Module.
EID78XYZ board is designed to convert efficiently 26-30 Volts AC (half wave) or DC
input voltage to stabilize custom DC voltage output (1.5 to 24V DC). If used properly, it will eliminate the need for
expensive industrial power supplies, which would otherwise be needed to carry out the same
is easy to install, setup and
operate. If you want to professionally power your HVAC products,
EID78XYZ offers the features you need. Mounted easily via one 0.125" mounting
holes. or directly solder to your board through 3 pins.
board is designed to attenuate, filter and regulate 26-30V DC or AC to
stable custom V DC.
replace any MC78XX/LM78XX/SG78XX regulator.
our line of transformers click
left to right:
Shown above set to regulate output
of 10V DC
replacement for MC78XX, LM78XX and SG78XX voltage regulators
regulators for 90% and up efficiency
capacitors no external components needed
also our adjustable
to 250mA output.
powered from any power source, AC or DC, that is larger then 2 volts of
the desired output voltage.
designed to operate from two or three 12VDC car batteries
AC or DC
voltage stability +/-3%
Up to 250mA, higher output current models are available.
from 1.5V to 24V DC
40 - 70 [F]
32 - 140 [F] (0 to 60°C) @ 95% RH
board DC voltage
1.25" long by 0.75" wide, 0.125" mounting hole (for 4-40 screw)
100% in USA
P#, SKU# and colors are subject to change without
Additional 10% discount with student ID, USA only.
Custom Power supply module
= Output voltage 1.5V to 24.0V DC
for 5.5V the SKU # will be: EID-7805X5-PS-YYY
10.0V the SKU # will be: EID-7810X0-PS-YYY
12.5V the SKU # will be: EID-7812X5-PS-YYY
1.5V the SKU # will be: EID-781X50-PS-YYY